Vegetable Garden Planner

Choose what your household eats. Get a plant list, the space it needs, and when to sow it — with room to change every quantity.

1. Your household & space

A starting point for one planting, not a year's food supply. Enter only the area you can plant, excluding paths outside the beds.

2. Pick your crops

Blank quantities use the household suggestion shown. Type a number to override it; 0 leaves that crop out. Custom quantities stay fixed when household size changes.

Crops and custom plant counts

Counts are established plants after thinning. Seed quantities and germination losses are not included.

3. Add spring dates

Zone dates are rough starting points. Replace them with your local average; the forecast and soil temperature decide when to plant.

Frost dates are saved to your yard on this device. Copy the link to keep your crop choices and custom counts.

Print or download — no email, no signup.

How many vegetable plants should I grow per person?

Start with the crops your household actually eats, then adjust the quantities to your experience. This planner uses the published per-person ranges from Virginia Cooperative Extension's home garden planting guide, Table 5. The low, middle and high settings choose a point inside those ranges. They are starting estimates for one planting, based on expected production, rather than a promise that your garden will meet a household's diet.

Keep the unit attached to the recommendation: plants per person per planting. A head of lettuce is harvested differently from a tomato vine picked repeatedly. Applying a seasonal multiplier to both can make a modest list surprisingly large. Here, each row represents one planting of that crop. A second sowing is a separate decision about space, weather and what you will eat.

Count plants, not seeds or meals

The quantity is the number of plants to establish. Carrots and beets will need thinning; nursery plants may fail; a tomato plant can produce repeatedly. This page does not predict harvest weight, calories or self-sufficiency. Change the suggested counts if your household loves a crop, rarely eats it, or already knows what it harvested last year.

How big a vegetable garden does a family of four need?

There is no useful answer without a crop list. For the six crops initially selected above, the middle of the published ranges gives the following comparison. Each crop's plant count is multiplied by its conventional row footprint, or divided by its square-foot density and rounded up to whole squares. These are planning areas, not drawn bed layouts.

PeoplePlantsConventional rowsIntensive squares4 × 8 ft bed equivalents
14758.7 sq ft31 sq ft1
292110.5 sq ft51 sq ft2
4184221.0 sq ft100 sq ft4

Calculated from the same engine as the tool. Tomato, pepper, head lettuce, bush bean, carrot and summer squash; middle range; one planting each. Bed equivalents use intensive area divided by 32 sq ft, rounded up. External paths excluded.

For four people, that particular list occupies 100 intensive square feet, compared with 221.0 square feet in conventional rows. The difference comes from the spacing systems; it does not prove that the smaller arrangement will produce the same harvest in your conditions. Start with fewer crops if the list is more work than you want.

What takes the most space in my raised beds?

Crop, four peoplePlantsRows, sq ftIntensive, sq ft
Tomato (staked)1272.012
Pepper1648.016
Lettuce (heads)3025.08
Bush bean4020.05
Carrot8020.05
Summer squash636.054

The same six-crop example, computed using this site's plant-spacing engine. Intensive density assumes the management described in the square-foot spacing guide.

Squash can use more intensive space than tomatoes

The example's 6 summer squash plants need 54 square feet in the intensive model; its 12 staked tomatoes need 12. The squash allowance is a whole block around each plant. A long list of tiny root-crop seedlings can fit more easily than a few sprawling plants.

Intensive tomatoes require support and pruning, and intensive cucumbers and pole beans need a trellis. Bush tomatoes, large cabbage varieties or wide trellis access can change the layout. Read the seed packet before treating a square-foot count as a placement rule. Conventional row spacing is a different system and can sometimes allocate less nominal area than an intensive block for a large crop.

What if my garden is too small for the plant list?

Enter your available planting area to see the shortfall. The planner preserves your choices and reports the extra area needed. It does not squeeze plants closer together to turn an oversized list into a green result. Even a list that fits by area may fail to fit a narrow bed: a square-foot block has a shape as well as an area.

  1. Remove vegetables nobody eats, then reduce the quantities of crops you only use occasionally.
  2. Look at the crop-by-crop space column before buying more beds. A sprawling crop may be better in a separate patch.
  3. Use the plant spacing calculator to check actual bed dimensions for each crop block.
  4. Size the soil purchase with the raised bed soil calculator, once the layout is settled.

A bed equivalent is only a lower bound from area. It includes neither a packing allowance nor access paths between beds. Conventional row footprints already include the specified row pitch; add external access space without counting the same between-row space twice.

When should I sow the plants in this plan?

Add the average last spring frost date for your location. The planner uses the same crop offsets as the seed-starting calculator to show indoor sowing, transplanting and direct sowing. Where two routes appear, they are alternatives for the same quantity; they do not ask you to plant that quantity twice. Seed-grown onions use seed-starting dates, not dates for purchased onion sets.

The year matters as much as the month. After June the planner initially offers next spring; you can change it. Early indoor starts can fall in the preceding calendar year, which is shown in the result. A USDA zone fills only an approximate frost date. Replace it with local data and use the frost-date guide to understand the uncertainty. In frost-free climates, use local planting calendars; the tool can still size your crops without inventing a frost date.

Can I reuse the same bed for succession plantings?

Often, but do not divide the total area by the number of plantings automatically. Later seedlings may need space before the earlier crop is finished. Heat, bolting, harvest duration and the variety's days to maturity determine whether a bed is truly available. This estimate reserves space for all selected crops and gives one spring starting point; it does not calculate a season-long occupancy schedule.

To spread harvests, make smaller batches within a locally suitable planting window. For a second planting, copy the first plan's link, change the quantities, and use the seed-starting tool's fall dates where appropriate. Keep a note of the bed and expected clearing date alongside each batch.

How much extra should I grow for preserving?

Use custom quantities rather than a universal doubling switch. Fresh tomatoes for sandwiches and a large sauce harvest are different goals; extra lettuce does not solve either. Decide how much of each crop you want to store, then compare that goal with your own harvest record or a local yield guide. The high-end setting here is still the high end of the source's per-planting range, not a preserving recommendation.

The printable sheet keeps quantities, space and dates together at the potting bench. Copy the link before leaving to preserve the full editable plan, including custom counts. The PDF reads the displayed result, and the yard profile shares frost dates with the other tools on this device.

Sources: Jadrnicek & Hessler, Virginia Cooperative Extension 426-331, Table 5 (per-person planting ranges); Texas A&M AgriLife, Planning a Garden (layout and household planning). The linked spacing and seed-starting pages document their own reference tables. Household estimates checked November 4, 2026.